Emergency Lighting
Contact the experts regarding emergency lighting in Long Eaton

Emergency Lighting Long Eaton

Emergency Lighting Long Eaton

The team offer a range of emergency lighting services, such as emergency lighting testing in Long Eaton. The services can be provided for a range of commercial properties which includes offices, factories, warehouses, schools, nurseries, retail chains, food outlets, care homes and housing associations. They are shown under the following categories.

High risk task areas require more light than evacuation routes or anti panic areas. The requirement is typically 10% of normal lighting or 15 lux minimum, so that staff involved in hazardous processes will properly shut down equipment before fire services arrive. Some examples might include acid baths at plants or industrial robots at factories.

Anti panic or open areas are designed to make it easier for people to find an evacuation route via direction finding and visual indicators. Open area emergency lighting in Long Eaton is typically implemented in large rooms such as school halls.

Escape route lighting assists the fire evacuation process by providing direction finding instructions and visual conditions, for promptly finding fire fighting and safety equipment. Standby lighting allows normal activities to continue when power failures happen. It does not provide fire protection unless it meets the same equipment design and installation requirements of emergency escape lighting in Long Eaton.

Emergency lighting in Long Eaton provides a safe exit from a business premises in the event of a fire. Emergency lighting should be tested at regular intervals in accordance with British Standards - BS5266. The well trained technicians will carry out a service which is suitable for your property requirements.

Emergency lighting in Long Eaton should be maintained every 6 months, and regular internal tests should be done on weekly/monthly intervals.

During testing these systems should operate for at least 1 hour upon becoming active, although increasingly the average has reached 3 hours as technologies continue to improve. Emergency lighting maintenance services for clients will be undertaken throughout the year.

For more information regarding emergency lighting services in Long Eaton from the experts, just fill in the enquiry form for a fast response.

Fire Exit Signs Long Eaton

The team can guide you on how fire exit signs in Long Eaton should work. In the vast majority of cases, the electrical supply of a business premises will be cut when a fire happens. When the power supply does fails, you will want to make sure that emergency lighting Long Eaton is operating as intended, so that your staff can safely evacuate whilst fire services get in easily.

Emergency lighting in Long Eaton is necessary in all areas requiring artificial lighting, including outside final exit points, first aid points, fire fighting equipment, corridors and intersections, changes in floor level, changes of directions, staircases, areas of special risk, open areas greater than 60 square meters, and on escape routes.

Illuminated fire exit signs in Long Eaton (also known as fire escape route signs) must be visible, even when power to the normal lighting fails. Subject to local regulations, the minimum backup duration of emergency lights is between 1-3 hours and the specialists will provide a supply, installation and maintenance service.

The specialists always aim to offer a reliable and economical solution towards your legal obligations regarding emergency lighting Long Eaton. They shall supply, fit and maintain all aspects of your emergency lighting system in Long Eaton including key switches, luminaries and control equipment.


How frequently should emergency exit lights in Long Eaton be tested?

emergency exit lights in long eaton should be tested every 6 months by a qualified technician whilst internal tests should be done on a weekly or monthly basis in accordance with bs5266.

How much will emergency lighting in Long Eaton cost?

the cost of emergency lighting in long eaton will depend upon a number of factors, including the size and complexity of the building, the number of circuits to be installed or maintained, and if it is manned or vacant.

Will emergency lighting testing in Long Eaton be disruptive?

if the emergency lighting systems are part of the main lights, they will need to be turned off during emergency lighting testing in long eaton. the specialists work closely with your business to minimise disruption.

What is BS5266 in regards to fire action signs in Long Eaton?

bs5266 is the code of practice for the emergency escape lighting and fire action signs of commercial premises, published in november x all emergency lighting in long eaton for organisations should be installed and inspected in compliance with these standards.

Recent Enquires

commercial premises looking for a quote for fire alarm and emergency lighting maintenance.


good morning, could you please contact me with regards to a quotation requirement for emergency light testing and annual check of 21 various fire extinguishers that are due this month (august 2017) in our serviced offices


detached building with 6 flats. communal hall one flight of stairs and small landing.


hello,we are a us company replacing 3 radomes at menwith hill. we need to submit an emergency lighting plan with our fire system. wondering if your firm has replaced or installed emergency lighting at menwith hill before. would you be able to prepare the design and do the installation? please respond via email at your earliest convenience and we can set up a date for a survey of the 3 radomes.many thanks,director of operationsradoem services llc