Emergency Lighting
Contact the professionals regarding emergency lighting






Emergency Lighting

Emergency Lighting

The team offer a range of emergency lighting services, such as emergency lighting testing. The services can be provided for a range of commercial properties which includes offices, factories, warehouses, schools, nurseries, retail chains, food outlets, care homes and housing associations. They are shown under the following categories.

High risk task areas require more light than evacuation routes or anti panic areas. The requirement is typically 10% of normal lighting or 15 lux minimum, so that staff involved in hazardous processes will properly shut down equipment before fire services arrive. Some examples might include acid baths at plants or industrial robots at factories.

Anti panic or open areas are designed to make it easier for people to find an evacuation route via direction finding and visual indicators. Open area emergency lighting is typically implemented in large rooms such as school halls.

Escape route lighting assists the fire evacuation process by providing direction finding instructions and visual conditions, for promptly finding fire fighting and safety equipment. Standby lighting allows normal activities to continue when power failures happen. It does not provide fire protection unless it meets the same equipment design and installation requirements of emergency escape lighting.

Emergency lighting provides a safe exit from a business premises in the event of a fire. Emergency lighting should be tested at regular intervals in accordance with British Standards - BS5266. The well trained technicians will carry out a service which is suitable for your property requirements.

Emergency lighting should be maintained every 6 months, and regular internal tests should be done on weekly/monthly intervals.

During testing these systems should operate for at least 1 hour upon becoming active, although increasingly the average has reached 3 hours as technologies continue to improve. Emergency lighting maintenance services for clients will be undertaken throughout the year.

For more information regarding emergency lighting services with the experts, just fill in the enquiry form for a fast response.

Fire Exit Signs

The team can guide you on how fire exit signs should work. In the vast majority of cases, the electrical supply of a business premises will be cut when a fire happens. When the power supply does fails, you will want to make sure that emergency lighting is working as intended, so that your staff can safely evacuate whilst fire services get in easily.

Emergency lighting is necessary in all areas requiring artificial lighting, including outside final exit points, first aid points, fire fighting equipment, corridors and intersections, changes in floor level, changes of directions, staircases, areas of special risk, open areas greater than 60 square meters, and on escape routes.

Illuminated fire exit signs (also known as fire escape route signs) must be visible, even when power to the normal lighting fails. Subject to local regulations, the minimum backup duration of emergency lights is between 1-3 hours and the specialists will provide a supply, installation and maintenance service.

The specialists always aim to offer a reliable and economical solution towards your legal obligations regarding emergency lighting . They shall supply, fit and maintain all aspects of your emergency lighting system including key switches, luminaries and control equipment.

FAQ's

How frequently should emergency exit lights be tested?

emergency exit lights should be serviced every 6 months by a qualified technician whilst internal tests should be done on a weekly or monthly basis in accordance with bs5266.

How much will emergency lighting cost?

the cost of emergency lighting will depend upon a selection of factors, including the size and complexity of the property, the number of circuits to be installed or maintained, and if it is occupied or vacant.

Will emergency lighting testing be disruptive?

if the emergency lighting systems are part of the main lights, they will need to be switched off during emergency lighting testing. the experts work closely with your business to minimise disruption.

What is BS5266 regarding fire action signs?

bs5266 is the code of practice for the emergency escape lighting and fire action signs of commercial premises, published in november x all emergency lighting for organisations should be installed and maintained in compliance with these standards.

Recent Enquires

hi,i have recently taken over a new building and need a fire alarm system and 4 emergency lights installing. this is to comply with cqc requirements. the premises is on the ground floor however there is a separate first floor accommodation as well (we do not rent this and are not responsible for this) I need installation as soon as possible. the property is based in macclesfield and is in total x sqft. can you please let me know rough quote and your availability

alisha

hi,could you please quote me for labour and parts for replacement of 2 emergency lights and isolator to fire alarm panel.regardsarmun jahromi

Armun

we are the freeholders of a block of 2 purpose built flats in bishops stortford and having agreed a sale on one of the flats have been asked by buyers solicitor to provide a fire risk assessment of the communal area, this consists of a corridor and 2 flights of stairs. are you able to quote for this please.

Liz

a quote for emergency lighting and installation urgent

Jemma